CYC carbide Grade Selector
CYC carbide Grade Selector
Find Your Project Match
Grade selection is crucial to meeting today’s strict quality requirements and technical challenges, while maximizing productivity. Use our Grade Selection Tool to find a match for your project needs.
Industry
Grade
Binder%
Grain Size
Hardness HRA
Hardness HV10
Industry | Grade | Binder% | Grain Size | Density g/cm^3 |
Hardness HRA |
Hardness HV10 |
T.R.S N/mm^2 |
T.R.S Psi |
Application |
---|---|---|---|---|---|---|---|---|---|
Oil & Gas |
MH5 |
4.8 |
Ultrafine |
14.95 |
94.1 |
2070 |
2400 |
348,331 |
for nozzle, with high wear resistance. |
Oil & Gas |
MH6 |
5 |
Submicron |
14.95 |
93.6 |
1950 |
2800 |
406,386 |
for sleeve and bushings, with high hardness and good wear resistance. |
Oil & Gas |
MH7 |
6.5 |
Submicron |
14.85 |
93.1 |
1840 |
2800 |
406,386 |
for choke valve component. |
Oil & Gas |
MH10F |
10 |
Submicron |
14.45 |
91.8 |
1600 |
3800 |
551,524 |
for drilling accessories. |
Oil & Gas |
CF10 |
6 |
Fine |
14.9 |
92 |
1630 |
3000 |
435,414 |
for nozzle and wear resistant valve parts for fluid control. |
Oil & Gas |
CG25 |
7 |
Medium |
14.75 |
90.2 |
1390 |
3200 |
464,441 |
for wear parts for valves,sleeves and bushings. |
Oil & Gas |
CG35 |
9.5 |
Medium |
14.55 |
89.3 |
1290 |
3400 |
493,469 |
for nozzle,wear parts with a high requirements of wear-resistant and anti-impact. |
Oil & Gas |
CG65 |
15 |
Medium |
13.95 |
87 |
1080 |
3600 |
522,496 |
for high impact resistance wear parts. |
Oil & Gas |
CK401 |
11.5 |
Coarse |
14.3 |
87.6 |
1130 |
2700 |
391,872 |
for high impact resistance wear parts. |
Oil & Gas |
CK402T |
15 |
Coarse |
14 |
85.8 |
980 |
2600 |
377,358 |
for high impact resistance wear parts. |
Oil & Gas |
CT80 |
20 |
Coarse |
13.45 |
84 |
840 |
2600 |
377,358 |
for large stress conditions, used as special-shaped product, mechanical parts and accessories,good strength and impact toughness。 |
Oil & Gas |
SK10 |
9.5(Co+Ni) |
Submicron |
14.45 |
91.5 |
1550 |
3000 |
435,414 |
for wear resistance and corrosion resistance parts, super corrosion resistance and high wear resistance. |
Mining&Construction |
SK15 |
10(Co+Ni) |
Submicron |
14.4 |
90.9 |
1480 |
3800 |
551,524 |
for solid carbide cage,with excellent corrosion & erosion resistance. |
Mining&Construction |
SK20N |
7.5(Ni) |
Submicron |
14.55 |
92.5 |
1720 |
2500 |
362,845 |
for corrosion and erosion resistance parts. |
Mining&Construction |
CR10 |
6 |
Medium |
14.85 |
90.4 |
1420 |
2800 |
406,386 |
for high air pressure DTH/TH Drill Bits on hard rock formations and Threded Bits on hard rock formations. |
Mining&Construction |
CT30 |
10 |
Coarse |
14.5 |
87.8 |
1150 |
2800 |
406,386 |
for various sizes gauge inserts for Cone Bits with higher wear resistance and toughness. |
Mining&Construction |
CK401 |
11.5 |
Coarse |
14.3 |
87.6 |
1130 |
2700 |
391,872 |
for drill bits with simple shape on medium hard and soft formations. |
Mining&Construction |
CK301 |
7.8 |
Coarse |
14.8 |
89.0 |
1270 |
2250 |
326,560 |
for small size inserts for Cone Bits with high toughness and excellent wear resistance on metal and coal mining. for big size inserts for low air pressure DTH/TH Drill Bits on complex and medium hard rock formations. |
Mining&Construction |
CK10 |
6 |
Medium |
14.9 |
91.3 |
1530 |
2100 |
304,790 |
for low air pressure DTH/TH Drill Bits on medium soft formations and small size inserts for Tapered Drill Bits on medium hard rock formations. |
Mining&Construction |
CE30 |
9 |
Coarse |
14.6 |
89.0 |
1270 |
2800 |
406,386 |
for super hard rock formation with excellent wear resistance. |
Mining&Construction |
CE60 |
12.5 |
Coarse |
14.2 |
87.0 |
1080 |
2850 |
413,643 |
for soft,mediem hard and hard rock formation with high toughness. |
Mining&Construction |
CE10T |
6 |
Extra Coarse |
14.85 |
88.0 |
1170 |
2200 |
319,303 |
for asphalt pavement road plane milling. |
Mining&Construction |
CE40T |
10 |
Extra Coarse |
14.5 |
85.7 |
970 |
2500 |
362,845 |
for cement road plane milling. |
Mining&Construction |
CE10 |
6 |
Coarse |
14.95 |
89.7 |
1330 |
2700 |
391,872 |
for drill bits with simple shape on medium hard and soft formations. |
Mining&Construction |
CE20T |
8 |
Extra Coarse |
14.7 |
86.5 |
1040 |
2300 |
333,817 |
|
Mining&Construction |
CE45T |
10 |
Extra Coarse |
14.50 |
84.6-86.1 |
890-1010 |
2200 |
319,303 |
|
Mining&Construction |
YG15C |
15 |
Coarse |
14 |
86 |
1000 |
2800 |
406,386 |
for HPGR. |
Mining&Construction |
SK10 |
9.5 |
Submicron |
14.45 |
91.5 |
1550 |
3000 |
435,414 |
for scraper of conveyor system,with anti-corrosion performanc and high wear resistance. |
Mining&Construction |
CE30 |
9 |
Coarse |
14.60 |
89 |
1270 |
2800 |
406,386 |
for super hard rock formation with excellent wear resistance. |
Mining&Construction |
CK401 |
11.5 |
Coarse |
14.30 |
87.6 |
1130 |
2700 |
391,872 |
for the Substrates of PDC Bits for Oil & Gas Drilling. |
Mining&Construction |
CK402T |
15 |
Coarse |
14 |
85.8 |
980 |
2600 |
377,358 |
for the Substrates of PDC Bits for Geological Prospecting and Mining. |
Saw tips-woodworking |
UK4 |
3 |
Ultrafine |
15.15 |
94.2 |
2100 |
3000 |
435,414 |
Chipboard |
Saw tips-woodworking |
UH5 |
3 |
Ultrafine |
15.15 |
94.3 |
2130 |
2600 |
377,358 |
Chipboar |
Saw tips-woodworking |
MH3 |
3.3 |
Ultrafine |
15.1 |
94.6 |
2180 |
2400 |
348,331 |
Chipboard, MDF, HDF |
Saw tips-woodworking |
MH4 |
3.3 |
Ultrafine |
15.2 |
94.6 |
2180 |
2400 |
348,331 |
Chipboard, MDF, HDF |
Saw tips-woodworking |
MH5 |
4.8 |
Ultrafine |
14.95 |
94.1 |
2070 |
2400 |
348,331 |
MDF, HDF |
Saw tips-woodworking |
MH6 |
5 |
Ultrafine |
14.95 |
93.6 |
1950 |
2800 |
406,386 |
MDF, HDF |
Saw tips-woodworking |
CF05-CR |
4.5 |
Fine |
14.95 |
93 |
1820 |
3000 |
435,414 |
Hard wood |
Saw tips-woodworking |
CF10A |
6 |
Fine |
14.9 |
92.7 |
1760 |
3000 |
435,414 |
Soft wood |
Saw tips-woodworking |
CF10R |
6.5 |
Fine |
14.8 |
92 |
1630 |
2200 |
319,303 |
Soft wood |
Saw tips-woodworking |
CF20A |
8 |
Fine |
14.65 |
91.9 |
1610 |
3200 |
464,441 |
Soft wood |
Saw tips-woodworking |
CK10 |
6 |
Medium fine |
14.9 |
91.3 |
1530 |
2100 |
304,790 |
Soft wood |
Saw tips-woodworking |
CK15 |
7 |
Medium fine |
14.8 |
91 |
1490 |
2300 |
333,817 |
Soft wood |
Saw tips-woodworking |
CK20 |
8 |
Medium fine |
14.7 |
90.2 |
1390 |
2500 |
362,845 |
Soft wood |
Saw tips-woodworking |
CK30 |
9 |
Medium fine |
14.6 |
89.8 |
1340 |
2600 |
377,358 |
Soft wood |
Saw tips-woodworking |
CK40 |
12 |
Medium fine |
14.3 |
88.8 |
1240 |
2800 |
406,386 |
Soft wood |
Saw tips-metalworking |
MH4 |
3.3 |
Ultrafine |
15.2 |
94.6 |
2180 |
2400 |
348,331 |
Aluminum |
Saw tips-metalworking |
MH6 |
5 |
Submicron |
14.95 |
93.6 |
1950 |
2800 |
406,386 |
Aluminum |
Saw tips-metalworking |
MH10F |
10 |
Submicron |
14.45 |
91.8 |
1600 |
3800 |
551,524 |
Steel |
Saw tips-metalworking |
UH12 |
12 |
Ultrafine |
14.15 |
92.2 |
1660 |
4000 |
580,552 |
Steel |
Saw tips-metalworking |
CF10 |
6 |
Fine |
14.9 |
92 |
1630 |
3000 |
435,414 |
Other Non-ferrous Metals |
Saw tips-metalworking |
CF20 |
8 |
Fine |
14.7 |
91 |
1490 |
3000 |
435,414 |
Other Non-ferrous Metals |
Saw tips-metalworking |
CX30 |
12 |
Fine |
11.9 |
91.6 |
1580 |
2500 |
362,845 |
Steel and cast iron |
Saw tips-metalworking |
CMT70 |
16 |
Fine |
7.3 |
92 |
1630 |
2100 |
304,790 |
Steel |
Saw tips-metalworking |
CMT80 |
18 |
Fine |
7.25 |
91 |
1490 |
2250 |
326,560 |
Steel |
M&D |
MH10F |
10 |
Submicron |
14.45 |
91.8 |
1600 |
3800 |
551,524 |
Excellent wear resistance, for progressive dies, for stamping of semi-conductor, Ic packaging, leadframe. |
M&D |
MH12S |
12 |
Submicron |
14.15 |
91.6 |
1580 |
4100 |
595,065 |
Excellent wear resistance, for progressive dies, for stamping of semi-conductor, Ic packaging, leadframe. |
M&D |
DF20 |
12.5 |
Submicron |
14.15 |
90.7 |
1450 |
3800 |
551,524 |
Excellent wear and shock, for stamping tools for cinnector, terminals, silicon chips etc. Also good for powder compacting nibs, drawing dies. |
M&D |
DF30 |
15 |
Submicron |
14 |
89.8 |
1340 |
3800 |
551,524 |
Excellent wear and shock, for stamping tools for cinnector, terminals, silicon chips etc. Also good for powder compacting nibs, drawing dies. |
M&D |
CG10 |
6 |
Medium fine |
14.85 |
90.6 |
1440 |
2800 |
406,386 |
Good wear and shock, for powder compacting nibs, (deep) drawing dies, hot forging dies. |
M&D |
CG35 |
9 |
Medium fine |
14.55 |
89.3 |
1290 |
3400 |
493,46 |
Good wear and shock, for powder compacting nibs, (deep) drawing dies, hot forging dies. |
M&D |
CG50 |
12 |
Medium fine |
14.2 |
88.2 |
1190 |
3500 |
507,983 |
Good wear and shock, for powder compacting nibs, (deep) drawing dies, hot forging dies. |
M&D |
CG65 |
15 |
Medium fine |
13.95 |
87 |
1080 |
3600 |
522,496 |
Good wear and shock, for powder compacting nibs, (deep) drawing dies, hot forging dies. |
M&D |
CT55 |
15 |
Coarse |
13.95 |
86 |
1000 |
2800 |
406,386 |
Excellent shock resistance, for foging heading, punching and reducing dies. |
M&D |
CT70 |
18 |
Coarse |
13.6 |
85 |
920 |
2700 |
391,872 |
Excellent shock resistance, for foging heading, punching and reducing dies. |
M&D |
CT80 |
20 |
Coarse |
13.45 |
84 |
840 |
2600 |
377,358 |
Excellent shock resistance, for foging heading, punching and reducing dies. |
M&D |
CT90 |
22 |
Coarse |
13.25 |
83 |
|
2500 |
362,845 |
Excellent shock resistance, for foging heading, punching and reducing dies. |
M&D |
CT95 |
25 |
Coarse |
13 |
82.5 |
|
2400 |
348,331 |
Excellent shock resistance, for foging heading, punching and reducing dies. |
Metalworking |
MH10F |
10 |
Submicron |
14.45 |
91.8 |
1600 |
3800 |
551,524 |
An excellent universal grade to cover most of the cuttingapplications for materials of ISO P, M, K, N. for drilling, milling and reaming. |
Metalworking |
UH12 |
12 |
Ultrafine |
14.15 |
92.2 |
1660 |
4000 |
580,552 |
Gives high impact strength while maintaining excellent wear resistance.A universal grade for cutting Stainless Steel,Titanium Alloys, Nickel base alloy and other difficult to machine materials. for milling, drilling. |
Metalworking |
MH7 |
6 |
Submicron |
14.85 |
93.1 |
1820 |
3500 |
406,386 |
A harder grade for machining aluminum alloys, graphite, composite materials. for milling, reaming and diamond coating. |
Metalworking |
UH8 |
8 |
Ultrafine |
14.6 |
93.2 |
1860 |
3300 |
478,955 |
Ultrafine grain size offers excellent sharpness for machining hardened materials up to 60 HRC, and extremely high performance machining of non- ferrous metals like Aluminum. |
Metalworking |
CH03D |
3 |
Fine |
15.25 |
93.2 |
1860 |
1800 |
261,248 |
Best choice for Diamond Coated Tools. Strongest adhesion and extended tool wear life. for high performance milling and Drilling of Composites, CFRP,Graphite. |
Metalworking |
SH904 |
9 |
Superfine |
14.45 |
94 |
2040 |
4000 |
580,552 |
Made of superfine grain size 0.2 ~ 0.4 um, high wear resistance and impact strength for meeting the most critical cutting challenges in composite materials including CFRP , graphite and hardened steels > 60 HRC |
Metalworking |
UH10 |
10 |
Ultrafine |
14.45 |
92.6 |
1740 |
3900 |
551,524 |
Good wear resistance and toughness gives high performance for cutting stainless steel, heat resistant alloy, cast iron, for high performance milling and drilling. |
Metalworking |
CK10H |
6 |
Medium |
14.9 |
91.3 |
1530 |
2500 |
362,845 |
Ideal grade for rotary bur blanks |
Metalworking |
CMT 60 |
16 |
Fine |
6.7 |
92.0 |
1630 |
2000 |
290,276 |
finishing |
Metalworking |
CMT 70 |
7.3 |
Fine |
7.3 |
92.0 |
1630 |
2100 |
304,790 |
finishing, semi-finishing |
Metalworking |
CMT 80 |
18 |
Fine |
7.25 |
91.0 |
1490 |
2250 |
326,560 |
semi-finishing, medium-rough |
Wear parts |
MH5 |
4.8 |
Submicron |
14.95 |
94.1 |
2070 |
2400 |
348,331 |
Top wear resistance for mechanical parts and accessories |
Wear parts |
MH6 |
4.8 |
Ultrafine |
14.95 |
93.6 |
1950 |
2800 |
406,386 |
for sleeve and bushings, with high hardness and good wear resistance. |
Wear parts |
UH8 |
8 |
Submicron |
14.6 |
93.2 |
1860 |
3300 |
478,955 |
Ultrafine grain size make the more excellent wear resistance for the wear parts, for brick mould wear parts, tool wear parts, etc. |
Wear parts |
MH10F |
10 |
Ultrafine |
14.45 |
91.8 |
1600 |
3800 |
551,524 |
for textile tools accessories. |
Wear parts |
CF10 |
6 |
Fine |
14.9 |
92 |
1630 |
3000 |
435,414 |
for middle wear resistance request tools and accessories |
Wear parts |
CK10 |
6 |
Medium |
14.9 |
91.3 |
1530 |
2100 |
304,790 |
Better balance impact resistance and wear resistance requirements |
Wear parts |
SK15 |
10(Co+Ni) |
Ultrafine |
14.4 |
90.9 |
1480 |
3800 |
551,524 |
for solid carbide cage,with excellent corrosion & erosion resistance. |
Wear parts |
SK20N |
7.5(Ni) |
Ultrafine |
14.55 |
92.5 |
1720 |
2500 |
362,845 |
for corrosion and erosion resistance parts. |