Carbide Flat Bars/Strips
Recommended Grades
Products
Home > Products > Tungsten carbide for metalworking > Other Metal Cutting Tool Blanks
Other Metal Cutting Tool Blanks
MH7/MH10F /UH12
Features
1. Using low press sintering technology, having good densification, and high hardness.
2. It is suitable for machining of steel, cast iron, stainless steel, heat-resistant steel, Nickel Titanium and so on.
3. After accurate grinding, it can reach a mirror effect surface.
2. It is suitable for machining of steel, cast iron, stainless steel, heat-resistant steel, Nickel Titanium and so on.
3. After accurate grinding, it can reach a mirror effect surface.
| T(mm} | Tol. | W(mm} | Tol. | L(mm) | Tol. |
|---|---|---|---|---|---|
| 1.5-4.0 | +0.15 / + 0.5 | 4 | +0.20 / + 0.5 | 330 | -2.0 / + 5.0 |
| 1.5-5.0 | 5 | ||||
| 1.5-6.0 | 6 | ||||
| 1.5-7.0 | 7 | ||||
| 1.5-8.0 | 8 | ||||
| 1.5-10.0 | 10 | ||||
| 1.5-12.0 | 12 | ||||
| 2.0-8.0 | 14 | ||||
| 2.0-8.0 | 15 | ||||
| 2.0-8.0 | 16 | ||||
| 2.0-8.0 | 18 | ||||
| 2.0-8.0 | 20 | ||||
| 2.0-8.0 | 22 | ||||
| 2 .0-8.0 | 25 .0 | ||||
| 2.0-8.0 | 26 | ||||
| 2.0-8 .0 | 30 | ||||
| 2.0-8.0 | 32 | ||||
| 2.0-8.0 | 35 | ||||
| 2.0-8.0 | 40 | ||||
| 2.0-8.0 | 45 |
